Malaysian
Journal of Analytical Sciences Vol 18 No 2 (2014): 385 - 390
EFFECT OF FERMENTED CHITIN NANOWHISKERS ON
PROPERTIES OF POLYLACTIC ACID BIOCOMPOSITE FILMS
(Kesan Kitin Terfermentasi Terhadap Sifat Filem Biokomposit Asid Poli
Laktik)
Syazeven Effatin Azma Mohd
Asri1, Zainoha Zakaria1*, Azman Hassan2,
M. K. Mohamad Haafiz2,3
1Department of Chemistry, Faculty of Science,
2Department of Polymer Engineering, Faculty of
Chemical Engineering,
Universiti
Teknologi Malaysia 81310 Skudai, Johor, Malaysia
3School of Industrial Technology,
Universiti Sains
Malaysia, 11800 USM Penang, Malaysia
*Corresponding author: zainoha@kimia.fs.utm.my
Abstract
The fermented
chitin nanowhiskers (FCNW) filled polylactic acid (PLA) biocomposite films were
successfully produced using solution casting method. The
biocomposite films were characterized in terms of tensile properties. The
Young’s modulus increased with increasing FCNW content while the tensile
strength increased and reached the maximum value at 4 phr FCNW loading.
Therefore it can be concluded that the optimum loading of FCNW is at 4 phr and
further addition of FCNW may lead to agglomeration resulting in a decrease in
tensile strength. The elongation at break of the biocomposite films decreased
rapidly upon addition of FCNW into PLA. From the Atomic Force Microscopy, the
surface morphology of the PLA changed upon addition of FCNW and tendency for
agglomeration of FCNW at high loading was observed.
Keywords: chitin, nanowhiskers,
polylactide, film, solution casting
Abstrak
Kitin nanowisker
daripada kitin terfermentasi (FCNW) yang memenuhi filem biokomposit asid poli
laktik (PLA) telah berjaya dihasilkan melalui kaedah tuangan larutan. Filem
biokomposit itu kemudiannya dicirikan berdasarkan sifat kekuatan tensilnya.
Modulus Young meningkat seiring dengan peningkatan kandungan FCNW manakala
kekuatan tensil meningkat dan mencapai nilai maksimum pada 4 phr. Oleh yang
demikian, boleh disimpulkan bahawa pengisian optimum FCNW adalah pada 4 phr dan
penambahan berterusan FCNW mungkin akan membawa kepada penggumpalan yang
mengakibatkan penurunan dalam kekuatan tensil. Ciri pemanjangan takat putus
filem biokomposit menurun secara mendadak dengan penambahan FCNW ke dalam PLA.
Daripada mikroskop daya atom, morfologi permukaan PLA berubah setelah ditambah
dengan FCNW dan potensi kepada penggumpalan pada pengisian tinggi FCNW telah diperhatikan.
Kata kunci: kitin, nanowisker,
asid poli-laktik, filem, tuangan larutan
References
1.
Yu,
L. et al. (2006). Polymer Blends and Composites from Renewable resources. Progress
in Polymer Science, 31:
576-602.
2.
Nampoothiri, K. M, Nair, N. R., & John, R. P.
(2010). An overview of the recent developments in polylactide (PLA)
research. Bioresource Technology, 101:
8493-850.
3.
Rizvi, R., Cochrane, B.,
Naguib, H & Lee, P.C. (2011). Fabrication and characterization of
polylactide-chitin composites and their foams. Journal of Cellular Plastics 47: 283-300.
4.
Chaussard, G. & Domard, A. (2004). New Aspects of the Extraction of Chitin from
Squid Pens. Biomacromolecules. 5, 559-564.
5.
Chandumpaia, A., Singhpibulpornb, N.,
Faroongsarngc, D. & Sornprasita, P. (2004). Preparation and
physico-chemical characterization of chitin and chitosan from the pens of squid
species. Loligo lessoniana and Loligo formosana, Carbohydrate Polymers. 58: 467-474.
6.
Struszczyk, M.H. (2006). Global Requirements for
Medical Applications of Chitin and its Derivatives. Polish Chitin Society, Monograph XI, 95-102.
7.
Rinaudo, M. (2006). Chitin and chitosan:
Properties and applications. Progress in
Polymer Science. 31: 603-632.
8.
Nishino, T., Matsui, R. & Nakamae, K., (1999).
Elastic Modulus of the crystalline regions of chitin and chitosan. J. Polymer Science Part B. 37: 1191-1196.
9.
Nor, N.M., Zakaria, Z., Manaf, M.S.A. & Salleh,
M.,M. (2011). The Effect of Partial Replacement of Dietary Fishmeal with
Fermented Prawn Waste Liquor on Juvenile Sea Bass Growth. Journal
of Applied Aquaculture 23: 51-57.
10.
Nair
G.K., & Dufresne A. (2003). Crab Shell chitin whisker reinforced natural
rubber nanocomposites. 1. Processing and Swelling Behavior Biomacromolecules,
4: 657-665.
11.
Haafiz,
M.K.M., Hassan, A., Zakaria, Z., Inuwa, I.M., Islam, M.S. & Jawaid, M.
(2013). Properties of polylactic acid composites reinforced with oil palm
biomass microcrystalline cellulose. Carbohydrate Polymer 98:139-145.
12.
Cheng, Q., Wang, S., & Rials, T.G.
(2009). Poly (vinyl alcohol) nanocomposites reinforced with cellulose fibrils
isolated by high intensity ultrasonication. Composites: Part A, 40:
218-224.
13.
Bulota,
M., Vesterinen, A.H., Hughes, & Seppälä, J. (2013). Mechanical Behavior, Structure, and
Reinforcement Processes of TEMPO-Oxidized Cellulose Reinforced Poly(lactic)
Acid. Polymer Composites.
34:173-179.
14.
Wang,
Y., Cao, X. & Zhang, L. (2006).
Effects of Cellulose Whiskers on Properties of Soy Protein
Thermoplastics. Macromolecule Biosciences. 6:
524-531.