Malaysian Journal of Analytical Sciences Vol 18 No 2
(2014): 245 – 250
POTENTIAL OF PALM OLEIN AS GREEN LUBRICANT SOURCE: LUBRICATION ANALYSIS
AND CHEMICAL CHARACTERISATION
(Potensi Minyak
Sawit Olein Sebagai Sumber Lubrikan Hijau: Analisis Pelinciran dan Pencirian
Kimia)
Darfizzi Derawi* and Jumat Salimon
School
of Chemical Sciences and Food Technology,
Faculty
of Science and Technology,
Universiti
Kebangsaan Malaysia, 43600 Bangi, Selangor, Malaysia
*Corresponding author: darfizzi@ukm.edu.my
Abstract
Palm olein (POo) is widely used as edible oil in tropical
countries. The lubrication properties and chemical compositions of POo
being considered to be used as renewable raw material for biolubricant
synthesis. POo is suitable to be used directly as biolubricant for
medium temperature industrial applications. Palm olein has good viscosity
index, oxidative stability, flash and fire point as a lubricant source. POo contains unsaturated
triacylglycerols (TAG): Palmitin-Olein-Olein, POO (33.3 %),
Palmitin-Olein-Palmitin, POP (29.6 %), which are very important to produce good
lubricant properties. This unsaturated bond is preferable in chemical
modification to produce biolubricant. The chemical compositions of POo
were tested by using high performance liquid chromatography (HPLC) and gas
chromatography (GC) techniques.
Keywords: Palm olein, Renewable Source, Lubrication Analysis,
Biolubricant
Abstrak
Minyak sawit
olein (POo) digunakan secara meluas sebagai minyak masak bagi negara-negara beriklim tropika.
Sifat-sifat pelinciran dan komposisi kimia POo dinilai untuk digunakan
sebagai bahan mentah dalam sintesis biolubrikan. POo sesuai
digunakan secara terus sebagai biolubrikan untuk aplikasi industri bersuhu
sederhana. Minyak sawit olein adalah baik sebagai sumber lubrikan berdasarkan
indeks kelikatan, kestabilan oksidatif, takat kilat dan api. POo
mengandungi triasilgliserida tak tepu (TAG): POO (33.3 %), POP (29.6 %) iaitu
sangat pnting untuk menghasilkan
sifat-sifat lubrikan yang baik. Ikatan tak tepu diperlukan dalam
modifikasi kimia untuk menghasilkan biolubrikan. Komposisi kimia POo
diuji menggunakan teknik kromatografi cecair berprestasi tinggi (HPLC) dan
kromatografi gas (GC).
Kata
kunci: Minyak Sawit Olein, Sumber Boleh Diperbaharui, Analisisi
Pelinciran, Biolubrikan
References
1. Derawi,
D. & Salimon, J. (2010). Optimization on Epoxidation of Palm Olein by Using
Performic Acid.E-Journal of Chemistry, 7 (4): 1440 – 1448.
2. Gunsotne, F. D. (2004). The Chemistry of Oils and Fats, Sources, Composition, Properties and Uses,
Blackwell Publishing Ltd., UK.
3. Gunstone, F. D. & Padley, F. B. (1997). Lipid Technologies and Applications,
Marcel Dekker, Inc., New York.
4. O’Brien, R. D. (1998). Fats and Oils: Formulating and Processing for Applications,
Technomic Publishing AG., Switzerland.
5. Gunstone, F. D., Harwood, J. L. & Padley, F. B.
(1994). The Lipid Handbook, 2nd
ed. Chapman & Hall, UK.
6. Salimon, J., Said, M., Ramli, S. & Mat Lazim, M.
A. S. (2006). Oils and Fats Analysis,
Penerbit UKM, Bangi.
7. Emery (1983). Emery
Analytical Testing Procedures, Emery Industries, USA.
8. Salih, N.
Salimon, J. Yousif E. & Abdullah, B. M. (2013). Biolubricant basestocks from chemically modified plant oils: ricinoleic
acid based-tetraesters, Chemistry Central Journal, 7 (128).
9. Salimon, J.
Abdullah, B.M. & Salih, N. (2012). Diesters
biolubricant base oils: synthesis, optimization, characterization and
physicochemical characteristics, International Journal of Chemical
Engineering, Article ID 896598.
10. Stachowiak, G. W. & Batchelor, A. W. (2005). Engineering Tribology, 3rd ed.
Elsevier Inc., UK.
11. ISO 3448 (1975).
International
Standard, Industrial Liquid Lubricants, ISO Viscosity Classification. ISO International Standards, US.
12. Ramli, M. R., Siew, W. L. & Cheah, K. Y. (2008). Properties of high-oleic palm oils derived by fractional crystallization. Journal of Food Science, 73 (3): 1750 – 3841.
13. Uniqema (2006). Oleochemical Ester Base Fluids for European Eco-label Compliant Lubricant
Formulations, Uniqema Inc, USA.
14. Hironaka,
S. (1984). Boundary Lubrication and Lubricants, Three Bond Co. Ltd., Japan.